Helpers--Electricians

Commercial Electrician

Ultimate LLC is immediately hiring Apprentice and Journeyman Electricians for commercial projects in the Phoenix area. The pay range is $25-$40 per hour based on experience. All electricians are currently scheduled 50 hours a week. We are looking for skilled craftsmen to add to our team of dedicated, safe, productive, and proven craftsmen. Ultimate LLC provides weekly pay for all employees with no week in the hole and optional direct deposit.

Ultimate Job Duties

+ Install and repair electrical wirings, systems, and fixtures in buildings

+ Must be able to utilize hand and hydraulic benders to bend conduit

+ Install conduit and pipes for wires and cables

+ Ensure piping complies with code

+ Make proper repairs and corrections

+ Test electrical components to ensure proper installation

+ Read Blueprints

Ultimate Trade Requirements

+ 3+ years of Electrical experience

+ Appropriate PPE (Hard hat, vest, steel toe boots)

+ Must have basic hand tools to perform trade

+ Ability to perform regular standing, bending and kneeling and lifting of up to 50 lbs without assistance

Ameresco, Inc. (NYSE:AMRC) is a leading cleantech integrator and renewable energy asset developer, owner and operator. Our comprehensive portfolio includes energy efficiency, infrastructure upgrades, asset sustainability and renewable energy solutions delivered to clients throughout North America and Europe. Our solutions range from upgrades to facility’s energy infrastructure to the development, construction and operation of renewable energy plants combined with tailored financial solutions. We foster an entrepreneurial, collaborative, and forward-thinking culture that thrives with innovation, diversity of thought, and inclusion. We are excited with all that the future holds for our industry, planet, and communities.

Ameresco’s Operations & Maintenance Group has a new opportunity for an BESS Solar Electrician in the Lake Havasu, AZ area experienced with inspecting, troubleshooting and maintaining a new BESS facility that will be up and running soon

The pay rate for this position is $45-$55 per hour

We are offering a $5,000 sign on bonus

Job Responsibilities:

+ Recognizes safety hazards and follows safety guidelines for personal protection, protection of fellow workers and the protection of the public.

+ Reads and interprets instruction manuals, blueprints and control system drawings; applies knowledge to daily tasks under the supervision of the Lead Electrician.

+ Completes written and electronic records (i.e. work orders, calibration sheets, time cards, material requests) required to document the work in progress and as it is completed.

+ Repair, test, troubleshoot, inspect; and install, remove and maintain solar site equipment such as solar panels, inverters, transformers, breakers, switchgear, and SCADA equipment.

+ Supervise and train apprentice electricians/coworkers to teach proper, safe use of tools and maintenance procedures.

+ Perform other duties as required.

Minimum Qualifications:

+ Current C-11 Commercial Electrician License

+ Minimum of 2 years experience of industrial solar electric/electronic maintenance experience in the repair, inspection, testing, installation and/or maintenance of related electrical/electronic equipment.

+ Valid Drivers' License in good standing, issued by state of residence.

+ High School Diploma or equivalent required.

Additional Qualifications:

+ Current Arizona A-17 License

+ Knowledge of electricity, voltage and current relationships for both AC and DC circuits.

+ Knowledge of Solar PV a plus.

+ Ability to successfully complete position training and testing requirements.

+ Ability to push, pull, bend, stand, stoop, lift, carry, reach, climb, hear, see, and work on ladders for extended periods of time with hands and arms at heights to install and troubleshoot equipment.

+ OSHA training and certification preferred.

+ Travel and flexibility for ‘on call’ support or varied schedule needs.

#LI-AG1

AMERESCO challenges the brightest, most talented and creative individuals in the industry by providing an environment that embraces initiative, diversity, and achievement along with comprehensive rewards, including people-oriented insurance, investment, and incentive plans.

Genuine Ameresco communications use @ameresco.com emails; any other domain is fraudulent. Report suspected phishing to 1-866-AMERESCO.

Equal Opportunity/Affirmative Action Employer/Women/Minorities/Veteran/Disability.

PeopleReady (PRST) is hiring for upcoming projects. As Journeyman Commercial Electrician with PRST, you?ll support electrical contractors throughout the Tucson Area. In this role, you'll enjoy weekly pay, health insurance benefits and a flexible work schedule.

_Note: The hourly rate for this position is $28 - $30 / hour. This range is a good-faith estimate based on factors such as relevant skills, experience, education, training, geographic location and other considerations permitted by law. An employee's pay history will not be a contributing factor where prohibited by local law. Applications are accepted on an ongoing basis unless a deadline is otherwise stated._

**Benefits:**

In addition to monetary compensation, we offer a competitive benefits package which includes 401k, medical, dental, vision, life and AD&D, short-term disability, critical illness, accident and hospital indemnity. More information can be found by visiting flimp.live/TrueBlueAssociates . Other compensations include referral bonuses opportunities. Learn more at https://skilled.peopleready.com/referral/ .

**Responsibilities:**

+ Measuring, cutting, and bending wire and conduit using measuring instruments and hand tools

+ Performing duties related to the installation, maintenance, and repair of a wide variety of electrical systems and equipment

+ Following state and local building regulations based on the National Electrical Code

+ Install, maintain, and repair electrical systems and equipment including wiring, transformers, switchgear, motors, and other electrical components.

+ Bend and install various types of conduit, including EMT, Rigid, and PVC.

+ Troubleshoot and diagnose electrical problems and recommend solutions.

+ Read and interpret blueprints, schematics, and other technical diagrams.

+ Install electrical systems according to industry standards and regulations.

+ Conduct regular inspections of electrical systems to ensure they are following safety regulations and standards.

+ Coordinate with other trades and contractors on construction sites to ensure timely completion of projects

+ Maintain accurate records of electrical work performed.

**Qualifications:**

+ Must have at least 5 Years Commercial Electrical experience

+ Must have tools of the trade

+ Must have verifiable work experience

+ Must have reliable transportation

TrueBlue, Inc. and its brands welcome and encourage applications from candidates with disabilities. Accommodations are available on request for candidates taking part in the selection process. If you require disability-related accommodation during the recruitment process, please contact your Recruiter or Employee Relations at HR-Advice@trueblue.com or 1.800.610.8920. TrueBlue, Inc. and its brands will consult with all applicants who request disability-related accommodation during the recruitment process to ensure that the accommodation provided takes into account the applicant's individual accessibility needs.

\#SKILLEDTRDPRI

PeopleReady is an equal opportunity employer, and we value diversity. We do not discriminate based on race, religious affiliation, color, national origin, gender, age, marital status, sexual orientation, gender identity, veteran status, disability, or any other basis protected by law. We will get to know you and connect you with jobs that match your skills, experience and preferences. We work hard every single day to find jobs so each employee has opportunity and variety in their work.

**Requisition ID: 168778**

**Position Summary**

Plan, lay-out, install, test and repair wiring, electrical fixtures, apparatus, motors, equipment and control systems in accordance with all applicable plans, specifications, codes and industry standards.

**Experience Level**

Skilled

**Primary Responsibilities and Duties**

• Interprets drawings, sketches, software, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems

• Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations

• Installs control and distribution apparatus’ and fastens in place

• Test and start up systems and continuity of circuit to insure electrical compatibility and safety of components

• Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement

• May be required to pull wire through conduit; connect wiring to lighting fixtures and power equipment

• Work with high and low voltage systems

• Disassembles and repairs defective electrical equipment or systems

• Operate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical tools

• Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.

• Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed.

**Qualifications**

• May require a high school diploma or its equivalent with previous years of experience in the field or in a related area.

• Must possess strong working knowledge skills and abilities for position.

• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.

• Proficient in the safe and efficient use of electrical, hand tools, power tools and layout tools as well as measurement tools

**Requirements**

• The person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl

• Constantly works in a construction environment and will be exposed to changing outdoor weather conditions

• Work irregular hours, weekends, overtime and holidays as required

• May be required to use ladders/mechanical platforms/manlifts/scaffold to access required equipment/work areas (may exceed 200 feet), so must be able to climb and maintain balance on formwork, steel formwork, stairs, ladders and scaffolds

• Move and work in and around confined and cluttered places, and uneven surfaces

• Must be able to complete tasks in a noisy and dusty environment

• May be required/able to move items weighing up to 50 pounds across construction/industrial site

• Must have required tools

• Licenses (List Requirements)

• Observe and comply with all safety and project rules, perform other duties as required

• Ability to pass pre-access drug and alcohol testing and fit for duty medical

Equal Opportunity Employer, including disability and protected veteran status.

Company: TIC_Craft

**Requisition ID: 168739**

**Position Summary**

Plan, lay-out, install, test and repair wiring, electrical fixtures, apparatus, motors, equipment and control systems in accordance with all applicable plans, specifications, codes and industry standards.

**Experience Level**

Skilled

**Primary Responsibilities and Duties**

• Interprets drawings, sketches, software, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems

• Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations

• Installs control and distribution apparatus’ and fastens in place

• Test and start up systems and continuity of circuit to insure electrical compatibility and safety of components

• Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement

• May be required to pull wire through conduit; connect wiring to lighting fixtures and power equipment

• Work with high and low voltage systems

• Disassembles and repairs defective electrical equipment or systems

• Operate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical tools

• Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.

• Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed.

**Qualifications**

• Must possess strong working knowledge skills and abilities for position.

• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.

• Proficient in the safe and efficient use of electrical, hand tools, power tools and layout tools as well as measurement tools

**Requirements**

• The person in this position needs to constantly move about a construction/industrial site,

so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl

• Constantly works in a construction environment and will be exposed to changing outdoor

weather conditions

• Work irregular hours, weekends, overtime and holidays as required

• May be required to use ladders/mechanical platforms/manlifts/scaffold to access

required equipment/work areas (may exceed 200 feet), so must be able to climb and

maintain balance on formwork, steel formwork, stairs, ladders and scaffolds

• Move and work in and around confined and cluttered places, and uneven surfaces

• Must be able to complete tasks in a noisy and dusty environment

• May be required/able to move items weighing up to 50 pounds across

construction/industrial site

• Must have required tools

• Observe and comply with all safety and project rules, perform other duties as required

• Ability to pass pre-access drug and alcohol testing, fit for duty medical and background

check

Equal Opportunity Employer, including disability and protected veteran status.

Company: TIC_Craft

**Requisition ID: 168742**

**Position Summary**

The Electrician apprentice is learning all tasks and/or working under the direction of an experienced craft worker to plan, lay-out, install, test and repair wiring, electrical fixtures, apparatus, motors, equipment and control systems in accordance with all applicable plans, specifications, codes and industry standards.

**Experience Level**

Semi-Skilled

**Primary Responsibilities and Duties**

• Interprets drawings, sketches, software, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems.

• Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations.

• Installs control and distribution apparatus’ and fastens in place.

• Test and start up systems and continuity of circuit to insure electrical compatibility and safety of components.

• Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement.

• May be required to pull wire through conduit; connect wiring to lighting fixtures and power equipment.

• Work with high and low voltage systems.

• Disassembles and repairs defective electrical equipment or systems.

• Operate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical tools.

**Qualifications**

• Must possess knowledge skills and abilities for position

• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision

• Field experience in chosen craft discipline

• Knowledge of the safe and efficient use of hand tools, power tools and layout tools.

**Requirements**

• The person in this position needs to constantly move about a construction/industrial site,

so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl

• Constantly works in a construction environment and will be exposed to changing outdoor

weather conditions

• Work irregular hours, weekends, overtime and holidays as required

• May be required to use ladders/mechanical platforms/manlifts/scaffold to access

required equipment/work areas (may exceed 200 feet), so must be able to climb and

maintain balance on formwork, steel formwork, stairs, ladders and scaffolds

• Move and work in and around confined and cluttered places, and uneven surfaces

• Must be able to complete tasks in a noisy and dusty environment

• May be required/able to move items weighing up to 50 pounds across

construction/industrial site

• Must have required tools

• Observe and comply with all safety and project rules, perform other duties as required

• Ability to pass pre-access drug and alcohol testing, fit for duty medical and background

check

Equal Opportunity Employer, including disability and protected veteran status.

Company: TIC_Craft

**Requisition ID: 168741**

**Position Summary**

Plan, lay-out, install, test and repair wiring, electrical fixtures, apparatus, motors, equipment and control systems in accordance with all applicable plans, specifications, codes and industry standards.

**Experience Level**

Skilled

**Primary Responsibilities and Duties**

• Interprets drawings, sketches, software, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems

• Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations

• Installs control and distribution apparatus’ and fastens in place

• Test and start up systems and continuity of circuit to insure electrical compatibility and safety of components

• Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement

• May be required to pull wire through conduit; connect wiring to lighting fixtures and power equipment

• Work with high and low voltage systems

• Disassembles and repairs defective electrical equipment or systems

• Operate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical tools

• Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.

• Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed.

**Qualifications**

• Must possess strong working knowledge skills and abilities for position.

• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.

• Proficient in the safe and efficient use of electrical, hand tools, power tools and layout tools as well as measurement tools

**Requirements**

• The person in this position needs to constantly move about a construction/industrial site,

so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl

• Constantly works in a construction environment and will be exposed to changing outdoor

weather conditions

• Work irregular hours, weekends, overtime and holidays as required

• May be required to use ladders/mechanical platforms/manlifts/scaffold to access

required equipment/work areas (may exceed 200 feet), so must be able to climb and

maintain balance on formwork, steel formwork, stairs, ladders and scaffolds

• Move and work in and around confined and cluttered places, and uneven surfaces

• Must be able to complete tasks in a noisy and dusty environment

• May be required/able to move items weighing up to 50 pounds across

construction/industrial site

• Must have required tools

• Observe and comply with all safety and project rules, perform other duties as required

• Ability to pass pre-access drug and alcohol testing, fit for duty medical and background

check

Equal Opportunity Employer, including disability and protected veteran status.

Company: TIC_Craft

Line Electrician - Morenci Water & Electric

Requisition ID: 138001

Location:

Morenci, AZ, US, 85540

Category: Maintenance

Share this Job

Why You Should Apply For This Job:

_At Freeport-McMoRan, we are committed to providing an employment package that recognizes excellence, encourages safe production and a culture supported by our core values. Here, you’ll find a collaborative environment where safety is a top priority, all opinions are valued, and people are empowered to grow in their career._ **_Apply Today! _**

**Where You Will Work**

Located approximately 50 miles northeast of Safford, Arizona on U.S. Highway 191, Morenci operations (an open-pit copper mining complex) has been in continuous operation since 1939. The operation consists of two concentrators, crushed-ore leach pad and stacking system, a low-grade run-of-mine (ROM) leaching system; four SX plants; and three EW tank houses that produce copper cathode.

Morenci is a unique company town where our employees and their families can reconnect with nature through hiking, fishing, camping, hunting and numerous parks. The company offers several amenities, including company housing OR employees who are required to work on-site are eligible for a $750 monthly housing allowance, provided they meet program guidelines, a newly constructed daycare and community center, library, health-care facilities, state-of-the-art fitness centers, a movie theater and a skate park. Our dedicated Parks and Recreation Division plans activities for people of all ages, making sure there’s something for everyone to enjoy. Visit the Morenci town website (https://www.morencitown.com/dining) to learn more.

**Description**

A Line Electrician safely performs duties relating to the construction and maintenance of high and low voltage power transmission lines and related structures and system components.

+ Perform duties associated with the extension and cutback of power lines and various distribution service lines for the site, mine, mobile equipment and substations

+ Tasks may include but are not limited to test, frame, and set poles; string electric power lines, install cross arms and anchors, replaces switches, and circuit protection equipment, etc.

+ Perform power line and system preventative maintenance

+ Troubleshoot system faults on power distribution lines

+ Perform construction and maintenance of high or low voltage electric power lines and structures

+ May install and maintain:

+ Distribution transmissions systems including substations, substation equipment, single and banked transformers and services

+ General area lighting and perform maintenance of single and banked transformers and services

+ Secondary and primary customer metering

+ Mentor or train other electrical workers and perform as a Fill-In Supervisor as needed

+ May perform groundman duties such as gathering materials, running equipment, etc.

+ Perform other duties as required

**Qualifications**

**Minimum Qualifications**

+ Completion of an approved Lineman Apprentice program, OR

+ Minimum of four (4) years of experience as a Lineman, OR

+ Associate’s degree or Trade School Certification in a related field and two (2) years of experience in overhead and underground power distribution, construction, maintenance and repair

+ Valid State Driver’s License with the ability to obtain a CDL certification within 90 days of hire date

+ Knowledge of rubber gloving, sticking, and livewire maintenance

+ Must be proficient in lock out, tag out, try out (LOTOTO)

+ Ability to work out of a bucket for long periods of time

+ Adequate score on Companywide assessment test to demonstrate knowledge

+ Proficiency in troubleshooting, maintenance and repair of overhead power distribution of electrical circuits and connected equipment, focusing on low and medium voltage; this includes the ability to read, understand and apply information from technical manuals, prints, and schematics for trouble shooting and repair

+ Effective written and verbal communication skills

+ Knowledge of NFPA-70E arc flash electrical safety standards

+ Must have completed academic and practical competencies required (this includes Line of Progression requirements for internal employees where LOP Exists) and have experience demonstrating the required aptitude. The selected candidate shall demonstrate the ability to apply knowledge and skills while also passing a written assessment where required. This exam is based on skills/abilities and/or academic knowledge; as well as safety.

**Preferred Qualifications**

+ High School diploma or GED

+ Be able to provide validation that you are experienced in performing energized line work by rubber glove technique or hot stick

**Criteria/Conditions**

+ Ability to understand and apply verbal and written work and safety-related instructions and procedures given in English

+ Ability to communicate in English with respect to job assignments, job procedures, and applicable safety standards

+ Must be able to work in a potentially stressful environment

+ This is a Safety sensitive role

+ Work is performed in a mine or manufacturing plant which may include exposure to extremes in temperature and humidity, moving mechanical parts, risk of electric shock, toxic chemicals, fumes or airborne particles

+ While performing duties of this job, the employee is required to stand, sit, demonstrate manual dexterity, climb stairs and ladders, work on elevated platforms, talk, hear, see and work in confined spaces

+ Occasionally may be asked required to life moderately heavy to heavy objects (up to 50 pounds) during the course of the workday

+ Will be required to work rotating shifts in a 24/7/365 operation

+ Personal protective equipment is required when performing work in a mine, outdoor, manufacturing or plant environment, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, rubber steel-toe boots, protective clothing, gloves and any other protective equipment as required

+ Freeport-McMoRan promotes a drug/alcohol-free work environment through the use of mandatory pre-employment drug testing and on-going random drug testing as allowed by applicable State laws

**What We Offer You**

The estimated pay range for this role is currently **$31.00 - $42.50/hour.** This range reflects base salary only and does not include bonus payments, benefits or retirement contributions. Actual base pay is determined by experience, qualifications, skills and other job-related factors. This role is eligible for additional discretionary and incentive payment considerations based on company and individual performance. More details will be shared during the hiring process. **Click here (https://performancemanager4.successfactors.com/doc/custom/freeportmc/MOR\_Total\_Rewards\_Estimate\_2\_6\_24v2.pdf)** to view a sample of Total Rewards Estimate for this role.

+ Employees who are required to work on-site are eligible for a $750 monthly housing allowance, provided they meet program guidelines

+ Affordable medical, dental and vision benefits

+ Company-paid life and disability insurance

+ 401(k) plan with employer contribution/match

+ Paid time off, paid sick time, holiday pay, parental leave

+ Tuition assistance

+ Employee Assistance Program

+ Discounted insurance plans for pet, auto, home and vehicle

+ Internal progression opportunities

+ Learn more (https://jobs.fcx.com/content/Benefits/?locale=en\_US) about our competitive and comprehensive benefits package!

**What We Require **

+ Candidates may be required to pass a medical exam.

+ Candidates must pass all required training and/or testing.

+ Employees may be required to work a non-standard schedule, which may include shift work (other than day shift) at a 24/7, 365-day operation.

**Equal Opportunity Employer **

_Please be advised that Freeport-McMoRan will never request payment for job-related expenses from applicants. If you receive any suspicious emails, please disregard them, and report the incident to_ _HRSC@fmi.com_ _._

Scottsdale Community College (SCC) is seeking a full-time Electrician Senior. This position will perform and provide lead oversight of journey level electrical work including the inspection, repair, installation and maintenance of electrical systems, equipment and components.

Summary This is the position of Electrician, at the Fred Lawrence Whipple Observatory (FLWO), in the Optical and Infrared Astronomy Division of the Smithsonian Astrophysical Observatory in Amado, Arizona. The individual is responsible for installing, modifying, repairing, maintaining, troubleshooting, testing, and loading new and existing electrical lines, circuits, systems and associated fixtures, controls, and equipment. Responsibilities 1.Installs, modifies, maintains, repairs, troubleshoots, and tests circuits, systems, associated fixtures, controls, and equipment of secondary power distribution lines and circuits used to supply a wide range of voltage, amperage, phase, and frequency requirements to distribution panels, switchgear, power and control circuits, fire detection and suppression systems, security alarms, lightning protection systems, and electronic monitoring systems. 2.Works from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals. Plans and lays out the routing, placement type, size, gauge, balance, load, continuity, and safe operation of electrical lines, circuits, systems, equipment and controls that support industrial operations, computer complexes, or similar complex electrical loads. Traces hard-to-locate defects or problems associated with the completion of repairs and installations. Determines and places distribution panels, boxes, fittings, and connections and install wiring, couplings, conduit, relays, fixtures, transformers, and other electrical devices including electrical service entrances. 3.Conduct training for other employees in the preventive maintenance, electrical safety, and servicing of all electrical systems and equipment. Identifies and communicates opportunities for improvement, cost savings, productivity/efficiency improvements and safety improvements. 4.Collaborates with architects and engineers to identify discrepancies between blueprints and on-site conditions, ensuring accurate project execution. Works with projects teams to ensure projects were completed on schedule and within budget. 5.Designs and development of various electrical systems and controllers. Performs site audits and inspections. Engages in all phases of new product introduction, including concept. Incumbent troubleshoots, repairs, and conducts preventive maintenance on motor control centers. Performs preventive maintenance as scheduled or required on electrical equipment as recommended by the manufacturer and on site safety programs. Ensures all work meets prescribed standards of quality and ensures compliance with all laws, safety procedures, policies and codes. Inspects electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair. Monitors performance of equipment and informs management of any potential problems. Interprets and applies the National Electrical Code, local codes, etc., and uses trade formulas to calculate common properties. Requirements Conditions of Employment Pre- and post-appointment background investigation May be required to serve a one-year probationary period. Males born after 12/31/59 must be registered with Selective Service. Direct Deposit/Elect Funds Transfer required for salary payment. Must have a valid drivers’ license and be able to operate a vehicle on a narrow, steep, unpaved mountain road. Physical requirements: Repairs and installations are made from ladders, scaffolding, platforms and other hard-to-reach places. This requires the employee to stand, stoop, bend, kneel, climb, and work in tiring and uncomfortable positions. The work requires frequently lifting and carrying of tools, equipment and parts that weigh up to 20 pounds and occasionally up to 40 pounds. As part of medical surveillance programs, the incumbent may be required to take medical examinations to assess his/her medical qualifications for the position of Electrician. Working conditions: The work is performed both inside and outside. The Electrician is sometimes required to make repairs and installations in bad weather and work in areas that are noisy, dirty, dusty, and greasy on scaffolding or cranes at heights of 30 feet or more and in close quarters such as manholes and attics. There is exposure to the possibility of injury from falling, electrical shock, burns, and injuries from rotary devices such as electrical motors and is frequently exposed to the possibility of cuts and bruises. Qualifications Your overall experience and training must indicate that you have the minimum knowledge, skills, abilities needed to perform the duties of this position. There is no substitution of education for experience for this position. Qualification requirements must be met by the closing date of the announcement. Additional information on the Job Qualification System for Trades and Labor Occupations can be found on OPM's web site at https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/ Education Additional Information